王耀奇, 李红, 侯红亮. Ti-6Al-4V合金置氢动力学与氢分布规律[J]. 工程科学学报, 2010, 32(5): 634-637. DOI: 10.13374/j.issn1001-053x.2010.05.001
引用本文: 王耀奇, 李红, 侯红亮. Ti-6Al-4V合金置氢动力学与氢分布规律[J]. 工程科学学报, 2010, 32(5): 634-637. DOI: 10.13374/j.issn1001-053x.2010.05.001
WANG Yao-qi, LI Hong, HOU Hong-liang. Hydrogen absorption kinetics and hydrogen distribution of Ti-6Al-4V alloy[J]. Chinese Journal of Engineering, 2010, 32(5): 634-637. DOI: 10.13374/j.issn1001-053x.2010.05.001
Citation: WANG Yao-qi, LI Hong, HOU Hong-liang. Hydrogen absorption kinetics and hydrogen distribution of Ti-6Al-4V alloy[J]. Chinese Journal of Engineering, 2010, 32(5): 634-637. DOI: 10.13374/j.issn1001-053x.2010.05.001

Ti-6Al-4V合金置氢动力学与氢分布规律

Hydrogen absorption kinetics and hydrogen distribution of Ti-6Al-4V alloy

  • 摘要: 通过Ti-6Al-4V合金750℃条件下的置氢实验,分析了置氢过程的动力学规律,利用光学金相显微镜和二次离子质谱仪研究了保温时间对氢分布的影响规律.结果显示,Ti-6Al-4V合金置氢动力学遵循二维扩散机制,满足Valensi方程g(α)=α+(1-α)ln(1-α),氢在试样径向方向的二维扩散是置氢反应的控制步骤.置氢保温时间大于60min时,氢压趋于稳定,氢在试样径向方向的二维扩散停止,试样中心的微观组织和氢离子强度与边缘的相一致,氢均匀分布于试样当中.

     

    Abstract: The hydrogenated tests of Ti-6Al-4V alloy were carried out at 750℃ and the hydrogen absorption kinetics was analyzed. The effect of holding time on the hydrogen distribution was studied by optical microscope and secondary ion mass spectrometry. The results show that the hydrogen absorption kinetics of Ti-6Al-4V alloy obeys the two-dimensional diffusion mechanism, in agreement with the Valensi equation g(α)=α+(1-α)ln(1-α), and thus the hydrogen diffusion is a rate-controlling step in the diametric direction of the sample. When the holding time is more than 60min, the hydrogen pressure becomes stable, hydrogen stops diffusing in the diametric direction of the sample, and the microstructure and hydrogen ion intensity at the center are the same as those at the brim during hydrogenation process, which proves that hydrogen distributes uniformly within the sample.

     

/

返回文章
返回