肖国华, 董瀚, 王毛球, 惠卫军. 钙处理齿轮钢中氧硫复合夹杂物的热变形能力[J]. 工程科学学报, 2010, 32(6): 735-738. DOI: 10.13374/j.issn1001-053x.2010.06.008
引用本文: 肖国华, 董瀚, 王毛球, 惠卫军. 钙处理齿轮钢中氧硫复合夹杂物的热变形能力[J]. 工程科学学报, 2010, 32(6): 735-738. DOI: 10.13374/j.issn1001-053x.2010.06.008
XIAO Guo-hua, DONG Han, WANG Mao-qiu, HUI Wei-jun. Hot deformability of oxide-sulfide duplex inclusions in calcium-treated gear steels[J]. Chinese Journal of Engineering, 2010, 32(6): 735-738. DOI: 10.13374/j.issn1001-053x.2010.06.008
Citation: XIAO Guo-hua, DONG Han, WANG Mao-qiu, HUI Wei-jun. Hot deformability of oxide-sulfide duplex inclusions in calcium-treated gear steels[J]. Chinese Journal of Engineering, 2010, 32(6): 735-738. DOI: 10.13374/j.issn1001-053x.2010.06.008

钙处理齿轮钢中氧硫复合夹杂物的热变形能力

Hot deformability of oxide-sulfide duplex inclusions in calcium-treated gear steels

  • 摘要: 采用金相分析、扫描电镜和能谱仪等分析手段,研究了钙处理加硫的DIN18CrNiMo7-6齿轮钢中氧硫复合夹杂物的形貌、成分和热变形行为.结果表明:外围硫化物的钙抑制了氧硫复合夹杂物的变形,当外围硫化物的钙原子分数约为5.0%时抑制作用达到饱和;高熔点核心氧化物的面积分数增加,复合夹杂物的变形能力降低,而低熔点核心氧化物对复合夹杂物变形能力的影响不明显.

     

    Abstract: The morphology,composition and hot deformation of oxide-sulfide duplex inclusions in resulfurized gear steel DIN 18CrNiMo7-6 were studied by metallographic examination,scanning electron microscopy (SEM) and electron spectroscopy analysis.The results show that the hot deformability of the oxide-sulfide duplex inclusions decreases with the increase of calcium content in the peripheral sulfides until the atom fraction of about 5.0%.Increasing the area ratio of the core oxides with high melting point makes the duplex inclusions less susceptible to deformation,while the oxides with low melting point have not obvious effect on it.

     

/

返回文章
返回