刘宇, 王旭东, 施桂钱, 姚曼, 张晓兵, 倪汉平, 陆洪周, 王雄. 宽厚板连铸黏结漏钢的工艺因素[J]. 工程科学学报, 2014, 36(6): 757-762. DOI: 10.13374/j.issn1001-053x.2014.06.008
引用本文: 刘宇, 王旭东, 施桂钱, 姚曼, 张晓兵, 倪汉平, 陆洪周, 王雄. 宽厚板连铸黏结漏钢的工艺因素[J]. 工程科学学报, 2014, 36(6): 757-762. DOI: 10.13374/j.issn1001-053x.2014.06.008
shu
LIU Yu, WANG Xu-dong, SHI Gui-qian, YAO Man, ZHANG Xiao-bing, NI Han-ping, LU Hong-zhou, WANG Xiong. Process factors of sticking breakout for wide and thick slab continuous casting[J]. Chinese Journal of Engineering, 2014, 36(6): 757-762. DOI: 10.13374/j.issn1001-053x.2014.06.008
Citation: LIU Yu, WANG Xu-dong, SHI Gui-qian, YAO Man, ZHANG Xiao-bing, NI Han-ping, LU Hong-zhou, WANG Xiong. Process factors of sticking breakout for wide and thick slab continuous casting[J]. Chinese Journal of Engineering, 2014, 36(6): 757-762. DOI: 10.13374/j.issn1001-053x.2014.06.008
shu

宽厚板连铸黏结漏钢的工艺因素

Process factors of sticking breakout for wide and thick slab continuous casting

    摘要
  • 摘要: 以钢厂宽厚板连铸黏结漏钢的实测样本为基础，重点考察了断面、拉速、液位等主要工艺因素对铸坯黏结的影响，统计和分析了黏结发生时的结晶器热流及其变化规律，对可能诱发黏结的浇铸参数和结晶器热流等进行了分析和探讨.

     

    Abstract: Based on measured data of wide and thick slab sticking breakout in a domestic iron and steel company, the influence of slab size, casting speed and mould level on the sticking breakout was studied. The variation of mould heat flux was investigated during the sticking breakout. Some possible reasons were discussed for the sticking breakout in view of casting parameters and mould heat flux.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回