具有核壳结构的FeS<sub>2</sub>微米球与碳纳米管原位复合介孔材料的构建及其在锂离子电池中的应用

官亮亮; 鲁建豪; 连芳

doi:10.13374/j.issn2095-9389.2019.04.009

具有核壳结构的FeS₂微米球与碳纳米管原位复合介孔材料的构建及其在锂离子电池中的应用

doi: 10.13374/j.issn2095-9389.2019.04.009

北京科技大学材料科学与工程学院, 北京 100083

基金项目:

国家重点研发计划资助项目(2018YFB0104302)

国家自然科学基金资助项目(51872026)

详细信息

中图分类号: TG142.71
计量
- 文章访问数: 507
- HTML全文浏览量: 194
- PDF下载量: 13
- 被引次数: 0
出版历程
- 收稿日期: 2018-11-22

Mesoporous composite of core—shell FeS₂ micron spheres with multi-walled CNTs and its application in lithium ion batteries

School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China

摘要

摘要: 通过简单的水热反应原位合成了具有核壳结构的FeS₂微米球与多壁碳纳米管复合的介孔材料(C-S-FeS₂@MWCNT).FeS₂微米球表面由纳米片状颗粒堆叠形成的厚度为~350 nm壳层,以及以化学键的形式吸附在微球表面的碳纳米管共同构成了材料保护层.保护层具有丰富的官能团和大量的孔隙结构,保证了锂离子扩散通道,并有效抑制了体积膨胀.C-S-FeS₂@MWCNT在200 mA·g^-1的电流密度下,250次循环可逆容量达到638 mA·h·g^-1,倍率性能也得到明显改善,为过渡金属硫化物电极材料的微米化设计和体积能量密度的提升提供了可能.
- 二硫化亚铁 /
- 碳纳米管 /
- 锂离子电池 /
- 核-壳结构
Abstract: Pyrite (FeS₂) is considered to be an excellent electrode material candidate for energy storage devices because of its abundant resources, cost effectiveness, environmental friendliness and high theoretical capacity of 894 mA·h·g^-1 based on conversiontype reactions. However, transition metal sulfides (TMSs), including FeS2, suffer from low electronic conductivity, sluggish Li ion transfer kinetics, and severe volume change while charging and discharging, which contribute to the sharp decline in capacity as well as limit its application as electrode material for secondary batteries. Downsizing TMS powders to the nanoscale becomes a common strategy to mitigate the volume change and maximize the proportion of active material involved in the electrochemical process. However, nanostructures lead to a serious interphase detrimental reaction, dissolution of the polysulfide intermediates, and low volumetric energy density. Therefore, micron particles are critical to the design of high energy density active material in view of industrial applications. In this study, a facile hydrothermal method has been successfully developed to synthesize a novel mesoporous composite of core-shell FeS₂ micron spheres with multi-walled carbon nanotubes (C-S-FeS₂@MWCNT). The protective layer is constructed on FeS₂ micron spheres consisting of the approximately 350 nm-thickness shell stacked by nanosheet FeS₂ particles and the reticular MWCNTs anchored via chemical binding. The FeS₂ content is determined using thermogravimetric analysis to be 73. 4% of the C-S-FeS₂@MWCNT composite, which is higher than the value of the reported compound material with nanopowder. The unique architecture with abundant functional groups and pore structures not only provides the Li + ion diffusion pathway but also buffers volume expansion during cycling. The galvanostatic circulation tests indicate that the C-S-FeS₂@MWCNT electrode delivers a high reversible capacity of 638 mA·h·g^-1 in 250 cycles at a current density of 200 mA·g^-1 and exhibits a significantly improved rate performance. This work demonstrates a new method to develop TMS micron electrode material with high volumetric energy density.
- ferrous iron disulfide /
- carbon nanotubes /
- lithium ion batteries /
- core-shell structure

HTML全文

参考文献(29)

[1]	Zhang S S, Tran D T. Mechanism and solution for the capacity fading of Li/FeS₂ battery. J Electrochem Soc, 2016, 163(5):A792
[2]	Tan R, Yang J L, Hu J T, et al. Core-shell nano-FeS₂@Ndoped graphene as an advanced cathode material for rechargeable Li-ion batteries. Chem Commun, 2016, 52(5):986
[3]	Fong R, Dahn J R, Jones C H W. Electrochemistry of pyritebased cathodes for ambient temperature lithium batteries. J Electrochem Soc, 1989, 136(11):3206
[4]	Hu Z, Zhang K, Zhu Z Q, et al. FeS₂ microspheres with an etherbased electrolyte for high-performance rechargeable lithium batteries. J Mater Chem A, 2015, 3(24):12898
[5]	Hu Z, Zhu Z Q, Cheng F Y, et al. Pyrite FeS₂ for high-rate and long-life rechargeable sodium batteries. Energy Environ Sci, 2015, 8:1309
[6]	Tomczuk Z, Tani B, Otto N C, et al. Phase relationships in positive electrodes of high temperature Li-Al/LiCl-KCl/FeS₂ cells. J Electrochem Soc, 1982, 129(5):925
[7]	Cabana J, Monconduit L, Larcher D, et al. Beyond intercalationbased Li-ion batteries:the state of the art and challenges of electrode materials reacting through conversion reactions. Adv Mater, 2010, 22(35):E170
[8]	Zhang F F, Huang G, Wang X X, et al. Sulfur-impregnated coreshell hierarchical porous carbon for lithium-sulfur batteries. Chem Eur J, 2014, 20(52):17523
[9]	Liang X, Liu Y, Wen Z Y, et al. A nano-structured and highly ordered polypyrrole-sulfur cathode for lithium-sulfur batteries. J Power Sources, 2011, 196(16):6951
[10]	Wang L N, Wang Y G, Xia Y Y. A high performance lithiumion sulfur battery based on a Li₂S cathode using a dual-phase electrolyte. Energy Environ Sci, 2015, 8(5):1551
[11]	Zhang D, Mai Y J, Xiang J Y, et al. FeS₂/C composite as an anode for lithium ion batteries with enhanced reversible capacity. J Power Sources, 2012, 217:229
[12]	Chen T, Zhang Z W, Cheng B R, et al. Self-templated formation of interlaced carbon nanotubes threaded hollow Co₃S₄ nanoboxes for high-rate and heat-resistant lithium-sulfur batteries. J Am Chem Soc, 2017, 139(36):12710
[13]	Ahn I S, Kim D W, Kang D K, et al. The effects of the particle size and active materials on the discharge properties of the Li/Fe (X) S₂ electrode. Met Mater Int, 2008, 14(1):65
[14]	Xu L, Hu Y J, Zhang H X, et al. Confined synthesis of FeS₂ nanoparticles encapsulated in carbon nanotube hybrids for ultrastable lithium-ion batteries. ACS Sustainable Chem Eng, 2016, 4(8):4251
[15]	Li L, Cabán-Acevedo M, Girard S N, et al. High-purity iron pyrite (FeS₂) nanowires as high-capacity nanostructured cathodes for lithium-ion batteries. Nanoscale, 2014, 6(4):2112
[16]	Mai L Q, Tian X C, Xu X, et al. Nanowire electrodes for electrochemical energy storage devices. Chem Rev, 2014, 114(23):11828
[17]	Zhang C F, Wang Z Y, Guo Z P, et al. Synthesis of MoS₂-C one-dimensional nanostructures with improved lithium storage properties. ACS Appl Mater Interfaces, 2012, 4(7):3765
[18]	Xu X, Cai T W, Meng Z, et al. FeS₂ nanocrystals prepared in hierarchical porous carbon for lithium-ion battery. J Power Sources, 2016, 331:366
[19]	Jin F Y, Wang Y. Topotactical conversion of carbon coated Febased electrodes on graphene aerogels for lithium ion storage. J Mater Chem A, 2015, 3(28):14741
[20]	Liu L, Yuan Z Z, Qiu C X, et al. A novel FeS₂/CNT microspherical cathode material with enhanced electrochemical characteristics for lithium-ion batteries. Solid State Ionics, 2013, 241:25
[21]	Zhu Y J, Fan X L, Suo L M, et al. Electrospun FeS₂@carbon fiber electrode as a high energy density cathode for rechargeable lithium batteries. ACS Nano, 2015, 10(1):1529
[22]	Lu J H, Lian F, Guan L L, et al. Adapting FeS₂ micron particles as an electrode material for lithium-ion batteries via simultaneous construction of CNT internal networks and external cages. J Mater Chem A, 2019, 7(3):991
[23]	Kahlweit M. Ostwald ripening of precipitates. Adv Colloid Interface Sci, 1975, 5(1):1
[24]	Xu X, Meng Z, Zhu X L, et al. Biomass carbon composited FeS 2 as cathode materials for high-rate rechargeable lithium-ion battery. J Power Sources, 2018, 380:12
[25]	Xu X J, Liu J, Liu Z B, et al. Robust pitaya-structured pyrite as high energy density cathode for high-rate lithium batteries. ACS Nano, 2017, 11(9):9033
[26]	Zhang F F, Wang C L, Huang G, et al. FeS₂@C nanowires derived from organic-inorganic hybrid nanowires for high-rate and long-life lithium-ion batteries. J Power Sources, 2016, 328:56
[27]	Pan G X, Cao F, Xia X H, et al. Exploring hierarchical FeS₂/C composite nanotubes arrays as advanced cathode for lithium ion batteries. J Power Sources, 2016, 332:383
[28]	Xu X, Cai T W, Meng Z, et al. FeS₂ nanocrystals prepared in hierarchical porous carbon for lithium-ion battery. J Power Sources, 2016, 331:366
[29]	Zhang X C, Shyy W, Sastry A M. Numerical simulation of intercalation-induced stress in Li-ion battery electrode particles. J Electrochem Soc, 2007, 154(10):A910