column
Bubble Properties in LHJ Flotation Column
Zhu Youyi, Zhang Qiang, Wang Huajun
1996, 18(5): 401-405. DOI: 10.13374/j.issn1001-053x.1996.05.001
Abstract PDF
Weathering Charecteristics and Mechanisms of Rapid-Hardening Backfill Materials
Cai Sijing, Mao Shilong, Fang Zulie
1996, 18(5): 406-409. DOI: 10.13374/j.issn1001-053x.1996.05.002
Abstract PDF
Bond Mechanism of Metallic Pellet Produced from Zn-Pb-Bearing Iron and Steel Plant Dust
Wang Dongyan, Chen Weiqing, Zhou Rongzhang, Lin Zongcai
1996, 18(5): 410-413. DOI: 10.13374/j.issn1001-053x.1996.05.003
Abstract PDF
Calculation Model of Mass Action Concentrations for Fe-C-O Metallic Melts
Zhu Rong, Zhang Jian, QIu Yongquan
1996, 18(5): 414-418. DOI: 10.13374/j.issn1001-053x.1996.05.004
Abstract PDF
Infrared Optical Properties of Diamond Films Deposited at Low Temperatures
Wang Jianjun, Lu Fanxiu
1996, 18(5): 419-423. DOI: 10.13374/j.issn1001-053x.1996.05.005
Abstract PDF
Sinter of Mechanical Activated Molybdenum-Copper Powder
Li Xiaohong, Jie Zizhang, Yang Rang, Hu Shuwen
1996, 18(5): 424-427. DOI: 10.13374/j.issn1001-053x.1996.05.006
Abstract PDF
Properties and Behavior of Single Crystal Diamond in Fe Substrate Binder
Wang Lan, Guo Ximian
1996, 18(5): 428-431. DOI: 10.13374/j.issn1001-053x.1996.05.007
Abstract PDF
Investigation on Heat Treatment Dual-Phase Drawn Steel Pipes Used as Hydraulic Cylinder
Wang Sigen, Feng Huiping, Hua Lixian, Wang Xu, Huang Man
1996, 18(5): 432-435. DOI: 10.13374/j.issn1001-053x.1996.05.008
Abstract PDF
Incremental Melting and Solidification Molding Process
Jia Chengchang, Nobuyoshi Sasaki
1996, 18(5): 436-439. DOI: 10.13374/j.issn1001-053x.1996.05.009
Abstract PDF
Fundamentals of the Spray Forming Processes for Fabrication of Materials
Zhang Jishan, Sun Zuqing, Chen Guoliang
1996, 18(5): 440-445. DOI: 10.13374/j.issn1001-053x.1996.05.010
Abstract PDF
Disscussion on Relationship between Thermal Mechanical Fatigue Life and Strain Range
Wang Jianguo, Wang Lianqing, Tang Junwu
1996, 18(5): 446-449. DOI: 10.13374/j.issn1001-053x.1996.05.011
Abstract PDF
Establishment and Realization of Integrated Quality Control System for the Process of Production
Lei Lixin, Zhu Weichang, He Yuxin
1996, 18(5): 450-453. DOI: 10.13374/j.issn1001-053x.1996.05.012
Abstract PDF
Study of Rolls Deformation of Pair Cross Mill
Wang Bangwen, Hu Bingjun
1996, 18(5): 454-459. DOI: 10.13374/j.issn1001-053x.1996.05.013
Abstract PDF
New Method of Input Torque Balancing of Planar Linkages
Han Jianyou, Zhang Suhua
1996, 18(5): 460-463. DOI: 10.13374/j.issn1001-053x.1996.05.014
Abstract PDF
Study of Contact Thermal Resistance between Two Coaxial Cylindrical Layers(Ⅱ):Parameter Analysis
Yin Xiaojing, Degiovanni A
1996, 18(5): 464-467. DOI: 10.13374/j.issn1001-053x.1996.05.015
Abstract PDF
Fully Digitized Direct Self-Control System of an AC Motor
Sun Shaoyuan, Wang Junran, Li Huade
1996, 18(5): 468-472. DOI: 10.13374/j.issn1001-053x.1996.05.016
Abstract PDF
High Speed Zn-Ni Alloy Electroplating
Meng Huimin, Wu Jixun, Liu Qunxian, Lu Yanping, Zhang Puqiang
1996, 18(5): 473-476,481. DOI: 10.13374/j.issn1001-053x.1996.05.017
Abstract PDF
Electrochemical Behavior of Reinforcing Steel Embedded in Fresh Concrete Mud
Zhang Lin, Wu Yinshun, Fang Zhi, Yao Yan, Tian Pei
1996, 18(5): 477-481. DOI: 10.13374/j.issn1001-053x.1996.05.018
Abstract PDF
Electrodeposition of Cu-Ni Layered Films by Dual Potential Pulse Method
Xue Jiangyun, Wu Jixun, Yang Dejun
1996, 18(5): 482-485. DOI: 10.13374/j.issn1001-053x.1996.05.019
Abstract PDF
Behavior of Fatigue Crack Formation under the Action of Combined Stresses
Jin Donglai, Liu Rufeng, Chen Zhanghua
1996, 18(5): 486-490. DOI: 10.13374/j.issn1001-053x.1996.05.020
Abstract PDF
Best approximation of Bezier Surface
Wang Bingtuan, Zhang Zhigang, Wang Juntuan, Wang Ping
1996, 18(5): 491-494. DOI: 10.13374/j.issn1001-053x.1996.05.021
Abstract PDF