column
Formation Mechanism of Zeolite A in the Hydrothermal Reaction System of Acid-treated Stellerite-NaOH-NaAlO2-H2O
SHEN Shaohua, FANG Keming, ZHANG Shugen, WANG Dawei
2003, 25(6): 489-494. DOI: 10.13374/j.issn1001-053x.2003.06.001
Abstract PDF
Competitive Adsorption of Arsenate and Chromate on Hydroxy-Fe-Montmorillo-nite Complex
WANG Xuelian, LIAO Libing, JIANG Hao, WANG Wenqiang
2003, 25(6): 495-500. DOI: 10.13374/j.issn1001-053x.2003.06.002
Abstract PDF
Iodine Leaching of Gold from Lean Gold Ore with Charcoal
LI Guichun, LU Shouci
2003, 25(6): 501-503,523. DOI: 10.13374/j.issn1001-053x.2003.06.003
Abstract PDF
Application of ∑△pi/di to Optimum Ratio Determination of Effective Silt Particles
SUN Henghu, DUAN Hongjie, LIU Huasheng
2003, 25(6): 504-506. DOI: 10.13374/j.issn1001-053x.2003.06.004
Abstract PDF
Numerical Simulation on the Influence of Blasting Vibration on the Freeway Slope
LIN Shiyan, LI Zhanghong, QIAO Lan, LIU Baoxu
2003, 25(6): 507-509. DOI: 10.13374/j.issn1001-053x.2003.06.005
Abstract PDF
Effect of Gas Flow on the Spectrum of Electromagnetic Radiation
NIE Baisheng, HE Xueqiu, SUN Jiping, WANG Enyuan, LIU Zhentang
2003, 25(6): 510-514. DOI: 10.13374/j.issn1001-053x.2003.06.006
Abstract PDF
Fundamental Research on the Cross Double Lance for PCI at Blast Furnace
WU Keng, WEI Xin, ZHANG Xiangguo, YANG Tianjun, CHEN Chunyuan, LI Anjun
2003, 25(6): 515-519. DOI: 10.13374/j.issn1001-053x.2003.06.007
Abstract PDF
Kinetics about Refining Ultra Low Sulphur Steel by Using Slag Systems with BaO
LI Suqin, ZHU Rong, LI Shiqi, WANG Xinhua, XIONG Guohong
2003, 25(6): 520-523. DOI: 10.13374/j.issn1001-053x.2003.06.008
Abstract PDF
Influence of Mold Flux Property on Heat Transfer in Mold
CHENG Zewei, CHEN Weiqing, LI Liansheng, YU Ping, YAO Jiahua
2003, 25(6): 524-527. DOI: 10.13374/j.issn1001-053x.2003.06.009
Abstract PDF
Composition Control of CaO-SiO2-Al2O3-MgO Inclusion by Using Low Basic Top Slag for Tire Cord Steel in Laboratory
WANG Lifeng, ZHANG Jiongming, WANG Xinhua, JIN Qingfeng
2003, 25(6): 528-531. DOI: 10.13374/j.issn1001-053x.2003.06.010
Abstract PDF
Modeling of a UML-Based Scheduling System for Steelmaking-Continuous Casting Production
LIU Wei, LI Tieke, ZHOU Zhi
2003, 25(6): 532-536. DOI: 10.13374/j.issn1001-053x.2003.06.011
Abstract PDF
Effect of Hydrogen on the Nanomechanical Properties of Passive Films Formed on Stainless Steel
YAO Yuan, QIAO Lijie, SUN Dongbo, CHU Wuyang
2003, 25(6): 537-541. DOI: 10.13374/j.issn1001-053x.2003.06.012
Abstract PDF
Wear Resistance Properties of Micro-arc Oxidized Ceramic Layer
LI Jinfu, FANG Keming, XIONG Renzhang, WANG Yongkang
2003, 25(6): 542-544. DOI: 10.13374/j.issn1001-053x.2003.06.013
Abstract PDF
Microstructure near the Penetrated Hole in an Experimental Penetration Target and Characteristics of the Adiabatic Shear Band
LI Jinquan, HUANG Dewu, DUAN Zhanqiang, CONG Meihua
2003, 25(6): 545-548. DOI: 10.13374/j.issn1001-053x.2003.06.014
Abstract PDF
Improving Electrochemical Performance of LiFePO4 as a Cathode Material
HU Huanyu, CHOU Weihua, LI Faxi, ZHAO Hailei, WANG Biyan
2003, 25(6): 549-552. DOI: 10.13374/j.issn1001-053x.2003.06.015
Abstract PDF
Synthesis of Butyraldehyde Glycol Acetal by using TiSiW12O40/TiO2 as Catalyst
YANG Shuijin, YU Xieqing, SUN Jutang
2003, 25(6): 553-555. DOI: 10.13374/j.issn1001-053x.2003.06.016
Abstract PDF
Rolling Speed during Flying Gauge Change for Tandem Mill and Rule of Volume Flow Rate
ZHENG Shenbai, HAN Jingtao, ZHAO Zhongli, WU Chuanzhen, ZHANG Pengcheng, YANG Fangmin
2003, 25(6): 556-559. DOI: 10.13374/j.issn1001-053x.2003.06.017
Abstract PDF
Computer Simulation of Rolling for H Beam
WANG Xin, WANG Zhangsong, YIN Zuoyong, TAO Dengkui, MA Guangting
2003, 25(6): 560-562,567. DOI: 10.13374/j.issn1001-053x.2003.06.018
Abstract PDF
Characteristic Stress-Strain and Damage Mechanism of Workpiece Due to Low Cycle Fatigue in Skew Rolling
YANG Haibo, ZHANG Lijie, MA Guohua, HU Zhenghuan
2003, 25(6): 563-567. DOI: 10.13374/j.issn1001-053x.2003.06.019
Abstract PDF
Distribution of Heat Production in Aluminum Foil Mills
YIN Fengfu, LI Mouwei, ZHANG Shaojun, LI Dongming
2003, 25(6): 568-571. DOI: 10.13374/j.issn1001-053x.2003.06.020
Abstract PDF
Recognition and Evaluation System for Strip Flatness on 2030 mm Cold Tandem Mills
DAI Jiangbo, WU Wenbin, ZHANG Qingdong, WANG Junfei, WANG Hui
2003, 25(6): 572-574,583. DOI: 10.13374/j.issn1001-053x.2003.06.021
Abstract PDF
Distinction and Evaluation of Adjacent Parallel Surface Cracks Based on Magnetic Flux Leakage
LIU Meiquan, XU Zhangsui
2003, 25(6): 575-579. DOI: 10.13374/j.issn1001-053x.2003.06.022
Abstract PDF
Doubly Fed lnduction Generator for Wind Turbines
WEI Yili, LI Huade, WU Zhenkui, SHANG Deshun
2003, 25(6): 580-583. DOI: 10.13374/j.issn1001-053x.2003.06.023
Abstract PDF
Effect of Environmental Condition on the Performance of Proton Exchange Mem-brane Fuel Cell
WU Maosheng, YU Datai, LI Guo, ZHANG Yangping
2003, 25(6): 584-586. DOI: 10.13374/j.issn1001-053x.2003.06.024
Abstract PDF
Energy Transfer over a Close Range by Microstrip Antennas
ZHANG Xuesong, ZHU Chaofu, GU Yi
2003, 25(6): 587-590. DOI: 10.13374/j.issn1001-053x.2003.06.025
Abstract PDF
Analysis on Dislocation Morphology and Dislocation Densities of Hot Strip of Low Carbon Steel Produced by CSP
WANG Kelu, KANG Yonglin, YU Hao, ZHAO Zhengzhi, CHEN Guijiang
2003, 25(6): 591-592. DOI: 10.13374/j.issn1001-053x.2003.06.026
Abstract PDF