column
Complex field theory,unified numerical modeling and integrated 3D visualization for mines
LI Zhongxue, HAO Jinhui, LI Cuiping, MA Bin
2007, 29(7): 651-654,664. DOI: 10.13374/j.issn1001-053x.2007.07.001
Abstract PDF
Design and optimization of the mining method of boundary coal-pillars with high recovery ratio and high efficiency
YE Genxi, JIANG Fuxing, LIU Pengliang, FENG Zengqiang, WANG Daozong
2007, 29(7): 655-659. DOI: 10.13374/j.issn1001-053x.2007.07.002
Abstract PDF
Prediction method of coal and gas outburst by analytic hierarchy process and fuzzy comprehensive evaluation
GUO Deyong, FAN Jinzhi, MA Shizhi, WANG Yibin
2007, 29(7): 660-664. DOI: 10.13374/j.issn1001-053x.2007.07.003
Abstract PDF
Interface identification in weathered granite strata based on a instrumented drilling system
TAN Zhuoying, CAI Meifeng, YUE Z. Q., THAN L. G., LEE C. E.
2007, 29(7): 665-669. DOI: 10.13374/j.issn1001-053x.2007.07.004
Abstract PDF
Equivalent characteristic of membership function type in rock mass fuzzy classification
SU Yonghua, HE Manchao, SUN Xiaoming
2007, 29(7): 670-675. DOI: 10.13374/j.issn1001-053x.2007.07.005
Abstract PDF
Numerical analysis of the formation process of a prestressed cable-beam structure
DU Wenxue, CHEN Zhanghua
2007, 29(7): 676-679. DOI: 10.13374/j.issn1001-053x.2007.07.006
Abstract PDF
Study of treatment chemicals for low-temperature oily wastewater
HUANG Lang, MA Zijun, ZHAO Zhenxing, CAI Yongsheng, FANG Keming, JIANG Shaojun
2007, 29(7): 680-684. DOI: 10.13374/j.issn1001-053x.2007.07.007
Abstract PDF
Inclusion morphology control in medium-carbon calcium sulphur free-cutting steel
YAN Guoan, QIN Zhe, TIAN Zhihong, SUN Yanhui, CAI Kaike
2007, 29(7): 685-688. DOI: 10.13374/j.issn1001-053x.2007.07.008
Abstract PDF
Spheroidized and ultra-fine structure formed by cold-rolling and annealing of eutectoid pearlite steel
FENG Zhiming, YANG Wangyue
2007, 29(7): 689-693,711. DOI: 10.13374/j.issn1001-053x.2007.07.009
Abstract PDF
Metastable austenite transformation in low carbon microalloying steel
ZHAO Yuntang, SHANG Chengjia, YANG Shanwu, WANG Xuemin, ZHANG Xueyong, HE Xinlai
2007, 29(7): 694-698. DOI: 10.13374/j.issn1001-053x.2007.07.010
Abstract PDF
One-parameter fatigue life prediction method at different stress ratios
RUAN Jinghong, LU Minxu, CHEN Yingfeng
2007, 29(7): 699-703. DOI: 10.13374/j.issn1001-053x.2007.07.011
Abstract PDF
High temperature oxidation behavior of FGH95 alloy
LIU Fengjun, ZHANG Maicang, DONG Jianxin, ZHANG Yiwen
2007, 29(7): 704-707. DOI: 10.13374/j.issn1001-053x.2007.07.012
Abstract PDF
Microstructure and magnetic properties of an Nd12.3Fe80.7NbB6 nanocrystal permanent magnet
SUI Yanli, CHEN Zhian, BAO Xiaoqian, ZHANG Maocai, ZHOU Shouzeng
2007, 29(7): 708-711. DOI: 10.13374/j.issn1001-053x.2007.07.013
Abstract PDF
Reversal process of magnetization of a Co/Cu/Co trilayer observed by longitudinal MOKE technique
WANG Yidong, WANG Lei, PAN Liqing, WU Ping, QIU Hong, WANG Fengping
2007, 29(7): 712-716. DOI: 10.13374/j.issn1001-053x.2007.07.014
Abstract PDF
Numerical simulation models of powder injection molding multiphase filling flow process
WANG Yuhui, QU Xuanhui, HE Xinbo
2007, 29(7): 717-720. DOI: 10.13374/j.issn1001-053x.2007.07.015
Abstract PDF
Microstructure and properties of a titanium alloy by metal injection molding
GUO Shibo, ZHANG Houan, ZHANG Rongfa, HE Xinbo, QIN Mingli, QU Xuanhui
2007, 29(7): 721-724. DOI: 10.13374/j.issn1001-053x.2007.07.016
Abstract PDF
Manufacture of Al5TilB master alloy refiner and its comparison with other products
CHEN Yajun, XU Qingyan, HUANG Tianyou
2007, 29(7): 725-729. DOI: 10.13374/j.issn1001-053x.2007.07.017
Abstract PDF
Synthesis of CaWO4 nano-powders
ZHAO Jie, CAO Lin
2007, 29(7): 730-734. DOI: 10.13374/j.issn1001-053x.2007.07.018
Abstract PDF
Kinetic study on the growth of ZnO nanorod array films prepared by hydrothermal method
GUO Min, DIAO Peng, WANG Xindong, CAI Shengmin
2007, 29(7): 735-738,749. DOI: 10.13374/j.issn1001-053x.2007.07.019
Abstract PDF
Automobile rigid multi-body handling stability model and its stability analysis
LIU Jinxia, ZHANG Wenming, ZHANG Guofen
2007, 29(7): 739-743. DOI: 10.13374/j.issn1001-053x.2007.07.020
Abstract PDF
Structure design and strength and stiffness analysis of an SGA92150 semi-trailer frame
ZHANG Guofen, ZHANG Wenming, SUN Yuliang, DONG Cuiyan
2007, 29(7): 744-749. DOI: 10.13374/j.issn1001-053x.2007.07.021
Abstract PDF
A high-performance multi-hop and synchronous time-division protocol for wireless sensor networks of equipment monitoring
FAN Yong, XU Jinwu, YANG Debin, WANG Qin
2007, 29(7): 750-754. DOI: 10.13374/j.issn1001-053x.2007.07.022
Abstract PDF