column
Elastoplastic model of damaged rock based on the strength theory
WANG Li, GAO Qian
2008, 30(5): 461-467. DOI: 10.13374/j.issn1001-053x.2008.05.020
Abstract PDF
Scale effect of soft rock rheology
CHEN Yuanjiang, XIE Benxian, CAO Ping, SHI Xiuzhi
2008, 30(5): 468-472. DOI: 10.13374/j.issn1001-053x.2008.05.021
Abstract PDF
Micro-numerical simulation of sand boil and analysis of its influencing factors
LIU Yang, WU Shunchuan, ZHOU Jian
2008, 30(5): 473-477. DOI: 10.13374/j.issn1001-053x.2008.05.022
Abstract PDF
Analysis of slope angle effect on the stability of a retaining wall on slope by numerical simulation method
JIN Aibing, GAO Yongtao, WANG Jinan
2008, 30(5): 478-481. DOI: 10.13374/j.issn1001-053x.2008.05.018
Abstract PDF
Photocatalytic degradation of acid red B lyst by Y2O3/WO3 as heterogeneous photocatalyst
CUI Yumin, SUN Wenzhong, ZHANG Wenbao
2008, 30(5): 482-486. DOI: 10.13374/j.issn1001-053x.2008.05.009
Abstract PDF
Formation zone of fluorine-free mold fluxes for slab continuous casting of low carbon steel
WANG Qian, HE Shengping, XIE Dan, HUANG Qingyun, Z. S. LI, K. C. MILLS
2008, 30(5): 487-491. DOI: 10.13374/j.issn1001-053x.2008.05.010
Abstract PDF
Effect of the heating furnace time of casting slabs on the ultrasonic testing quality of medium plates
SUN Qisong, WANG Xinhua, XU Xiaodong, JIANG Dongcai, BAI Xuejun
2008, 30(5): 492-494,500. DOI: 10.13374/j.issn1001-053x.2008.05.011
Abstract PDF
Continuous cooling transformation of Nb-V-microalloyed high-strength hull steel
XIAO Guohua, WANG Fuming, LI Zhangrong, XIAO Jiguang
2008, 30(5): 495-500. DOI: 10.13374/j.issn1001-053x.2008.05.019
Abstract PDF
Crack initiation time determined by tapered round specimens
SHI Dongmei, LI Jinxu, GAO Kewei, QIAO Lijie
2008, 30(5): 501-503,521. DOI: 10.13374/j.issn1001-053x.2008.05.012
Abstract PDF
Grey relational analysis of atmospheric corrosion of stainless steels in terms of exposure time in representative areas
HAO Xianchao, LI Xiaogang, DONG Chaofang
2008, 30(5): 504-508. DOI: 10.13374/j.issn1001-053x.2008.05.013
Abstract PDF
Magnetization reversal mechanism in FePt: Au granular films
JIA Tingli, LIU Xun, ZHAO Sufen, CHEN Ziyu
2008, 30(5): 509-512. DOI: 10.13374/j.issn1001-053x.2008.05.014
Abstract PDF
Influence of buffer layers on the anisotropic magnetoresistance of NiCo films
JIANG Hongwei, JI Hong, ZHOU Liping, WANG Ailing, ZHENG Wu
2008, 30(5): 513-516. DOI: 10.13374/j.issn1001-053x.2008.05.017
Abstract PDF
Influences of surfactant Bi on the exchange coupling field and microstructure of spin-valve multilayers
DU Zhongmei, CAI Yongxiang, DING Lei, ZHU Yi, LI Minghua, TENG Jiao, YU Guanghua
2008, 30(5): 517-521. DOI: 10.13374/j.issn1001-053x.2008.05.015
Abstract PDF
Effect of thickness on the critical phase transition temperature of 1-3 type BaTiO3-CoFe2O4 multiferroic composite thin films
LU Xiaoyan, LIU Yulan, WANG Biao
2008, 30(5): 522-526. DOI: 10.13374/j.issn1001-053x.2008.05.016
Abstract PDF
Synthesis and structural properties of nano-crystalline Mn-Zn ferrites
ZHENG Zhigang, ZHONG Xichun, ZHANG Yahui, CENG Dezhang, ZHAO Jie, WU Shuguo, HUANG Guanwei, DAN Lianjun
2008, 30(5): 527-531. DOI: 10.13374/j.issn1001-053x.2008.05.005
Abstract PDF
High-temperature solid state synthesis and characterization in magnetic and transporting properties of ZnxFe3-xO4 powder
HUANG Xiufeng, ZHAO Xuedan, XU Mei, QIU Hongmei, QIN Liangqiang, PAN Liqing
2008, 30(5): 532-536. DOI: 10.13374/j.issn1001-053x.2008.05.006
Abstract PDF
Grain orientation and magnetic properties of anisotropic permanent magnetic strontium ferrite
YU Hongya, LIU Zhengyi, CENG Dezhang, XIE Jinqiang
2008, 30(5): 537-539,557. DOI: 10.13374/j.issn1001-053x.2008.05.023
Abstract PDF
Preparation and properties of visible light responding N-doped TiO2 nanopowder by hydrothermal synthesis
WANG Yichao, LIU Zhongqing, YAN Qingzhi, LI Zhenhua, GE Changchun
2008, 30(5): 540-543. DOI: 10.13374/j.issn1001-053x.2008.05.007
Abstract PDF
Technique of preparing diamond films on poly-substrate by DC-arc plasma jet CVD for surface acoustic wave devices
ZHANG Yujun, LV Fanxiu, ZHANG Jianjun, CHEN Liangxian
2008, 30(5): 544-547. DOI: 10.13374/j.issn1001-053x.2008.05.025
Abstract PDF
Convective effects during unidirectional solidification
ZHANG Guozhi, FENG Yanhui, ZHANG Xinxin, NIE Hong
2008, 30(5): 548-552. DOI: 10.13374/j.issn1001-053x.2008.05.008
Abstract PDF
Application of multidimensional time series fuzzy association rules for hot metal temperature forecasting in a blast furnace
GUO Hongwei, GAO Xuedong, CHEN Lingkun, YANG Tianjun
2008, 30(5): 553-557. DOI: 10.13374/j.issn1001-053x.2008.05.026
Abstract PDF
Characteristics of backup roll wear contour in a CVC continuous hot rolling mill
LI Hongbo, ZHANG Jie, CAO Jianguo, HE Junli, ZHANG Shushan, WANG Qiang
2008, 30(5): 558-561. DOI: 10.13374/j.issn1001-053x.2008.05.002
Abstract PDF
Roller eccentricity signal pick-up and adaptive control based on lifting wavelet transform and self-optimization
ZHOU Jianxin, YANG Weidong, YE Shuang
2008, 30(5): 562-565,570. DOI: 10.13374/j.issn1001-053x.2008.05.003
Abstract PDF
Production plan schedule for the casting-rolling process in BOF special steel plants
LIU Qing, BAI Suhong, LU Junhui, ZHANG Liqiang, CHENG Guoguang
2008, 30(5): 566-570. DOI: 10.13374/j.issn1001-053x.2008.05.004
Abstract PDF
Application of an expert system to arc furnace steel-making
JIANG Jing, SUN Tie, JIANG Lin
2008, 30(5): 571-575. DOI: 10.13374/j.issn1001-053x.2008.05.001
Abstract PDF
Design of the interpolation filter in an all-digital timing recovery scheme
WANG Qin, LI Han, LU Chengyong
2008, 30(5): 576-580. DOI: 10.13374/j.issn1001-053x.2008.05.024
Abstract PDF