column
Experiment research of D-InSAR technique on identifying landslide moving in a wide area
WANG Gui-jie, XIE Mo-wen, QIU Cheng, WU Wei-lun, HUANG Jie-hui
2011, 33(2): 131-141. DOI: 10.13374/j.issn1001-053x.2011.02.021
Abstract PDF
Mechanics analysis on creep fracture of strong roof strata above mined-out area
WANG Jin-an, LI Da-zhong, SHANG Xin-chun
2011, 33(2): 142-148. DOI: 10.13374/j.issn1001-053x.2011.02.001
Abstract PDF
Mechanism of coal and gas bursts caused by vibration
LI Xiang-chun, NIE Bai-sheng, HE Xue-qiu
2011, 33(2): 149-152. DOI: 10.13374/j.issn1001-053x.2011.02.002
Abstract PDF
Roasting reduction-magnetic separation technology of Xuaniong-type iron ore and its relevant influencing factors
LI Ke-qing, WANG Li-ning, NI Wen, ZHU Ming, LIU Bao-shun
2011, 33(2): 153-156. DOI: 10.13374/j.issn1001-053x.2011.02.003
Abstract PDF
Numerical modeling of flow fields in the continuous casting process of steel under electromagnetic stirring
YU Yang, LI Bao-kuan, YANG Gang
2011, 33(2): 157-160. DOI: 10.13374/j.issn1001-053x.2011.02.004
Abstract PDF
Granularity and reactivity of melted slag quenched and atomized by a high pressure water jet
LI Yu, ZHANG Ling-ling, ZONG Yan-bing, LIU Xiao-ming, CANG Da-qiang
2011, 33(2): 161-165. DOI: 10.13374/j.issn1001-053x.2011.02.005
Abstract PDF
Microstructure,properties and strengthening mechanism of China low activation martensitic steel
LI Hua-jie, WU Hui-bin, TANG Di
2011, 33(2): 166-171. DOI: 10.13374/j.issn1001-053x.2011.02.006
Abstract PDF
Hot deformation behavior of 9Cr reduced activation martensitic steel
MA Rong, YANG Ya-feng, YAN Qing-zhi, YANG Ying, GE Chang-chun
2011, 33(2): 172-177. DOI: 10.13374/j.issn1001-053x.2011.02.007
Abstract PDF
Lubrication mechanism and effects in hot-strip rolling process
MA Yan-li, SUN Jian-lin, GAO Ya, LI Ning-ting
2011, 33(2): 178-181. DOI: 10.13374/j.issn1001-053x.2011.02.008
Abstract PDF
Effect of process conditions on the preparation of copper powders by electro-deposition
GUO Xue-yi, CHEN Sheng-li, LIANG Yong-xuan, TIAN Qing-hua
2011, 33(2): 182-187. DOI: 10.13374/j.issn1001-053x.2011.02.009
Abstract PDF
Film formation mechanism of coated SnAgCu alloy powders via vacuum evaporation
MA Yun-zhu, CUI Peng, LIU Wen-sheng, PENG Fen, HUANG Guo-ji
2011, 33(2): 188-192. DOI: 10.13374/j.issn1001-053x.2011.02.010
Abstract PDF
Effects of mish-metal on microstructures and properties of a Mg-9Y-0.6Zr alloy
MA Ming-long, HE Lan-qiang, ZHANG Ya, LI Yong-jun, LI Xing-gang, ZHANG Kui
2011, 33(2): 193-199. DOI: 10.13374/j.issn1001-053x.2011.02.011
Abstract PDF
Effect of heat treatment conditions on IrO2-pH electrode properties
CHEN Xu, HE Chuan, DU Cui-wei, LI Xiao-gang, WU Ming
2011, 33(2): 200-204. DOI: 10.13374/j.issn1001-053x.2011.02.012
Abstract PDF
Synthesis and electrochemical performances of LiFePO4/CNT composite materials
ZHANG Yong, DU Pei-pei, WANG Li-zhen, ZHANG Ai-qin, SONG Yan-hua, LI Xiao-feng
2011, 33(2): 205-209. DOI: 10.13374/j.issn1001-053x.2011.02.020
Abstract PDF
Shrinkage distortion of fiber-reinforced high-ductility cementitious composites
DENG Zong-cai, XUE Hui-qing
2011, 33(2): 210-214. DOI: 10.13374/j.issn1001-053x.2011.02.019
Abstract PDF
Improvement of a radar signal processing system for burden surface measurement in a blast furnace
CHEN Xian-zhong, YIN Yi-xin, HOU Qing-wen, LI Xiao-li, MA Jian, WANG Meng
2011, 33(2): 215-220. DOI: 10.13374/j.issn1001-053x.2011.02.022
Abstract PDF
Integrated model of a hot rolling mill based finite element analysis and neural networks
HU Zhang-bin, TONG Chao-nan, PENG Kai-xiang
2011, 33(2): 221-226. DOI: 10.13374/j.issn1001-053x.2011.02.013
Abstract PDF
FEM simulation on width spread during the multi-pass and reversing process of roughing horizontal rolling for hot strip mills
YANG Chun-yan, LI Zhong-fu, ZHANG Guo-zhu, GUO Bao-lin
2011, 33(2): 227-231. DOI: 10.13374/j.issn1001-053x.2011.02.014
Abstract PDF
Influencing factors on cooling uniformity of large caliber seamless steel pipes during quenching
LIU Guo-yong, ZHU Dong-mei, ZHANG Shao-jun, LI Mou-wei, BIAN Xin-xiao
2011, 33(2): 232-236. DOI: 10.13374/j.issn1001-053x.2011.02.015
Abstract PDF
Synthesis research of straight-line mechanisms by analyzing solution regions
YIN Lai-rong, HAN Jian-you
2011, 33(2): 237-243. DOI: 10.13374/j.issn1001-053x.2011.02.017
Abstract PDF
Application study on the composite technology of impact compaction,asphalt rubber and stress absorbing membrane interlayer in road engineering
LI Ting-gang, LI Zhang-hong
2011, 33(2): 244-249. DOI: 10.13374/j.issn1001-053x.2011.02.018
Abstract PDF
Solving the shock wave solutions of reaction-diffusion equations based on Conley index theory
ZHANG Liu, ZHANG Xiao-dan
2011, 33(2): 250-256. DOI: 10.13374/j.issn1001-053x.2011.02.016
Abstract PDF