column
Blasting parameter study of deep-hole cumulative blasting to improve coal seam permeability
GUO De-yong, LÜ Peng-fei, WANG Yi-gui, YANG Rui
2013, 35(12): 1533-1537. DOI: 10.13374/j.issn1001-053x.2013.12.004
Abstract PDF
Optimization of microseismic monitoring networks based on the theory of D-optimal design
GAO Yong-tao, WU Qing-liang, WU Shun-chuan, JI Mao-wei, CHENG Ai-ping, YANG Kai
2013, 35(12): 1538-1545. DOI: 10.13374/j.issn1001-053x.2013.12.005
Abstract PDF
Cellular automata-based tunnel fire simulation
LI Cui-ping, HU Lei, HOU Ding-yong, ZHANG Jia
2013, 35(12): 1546-1552. DOI: 10.13374/j.issn1001-053x.2013.12.006
Abstract PDF
Pressure rake analysis of deep cone thickeners based on tailings' settlement and rheological characteristics
LI Hui, WANG Hong-jiang, WU Ai-xiang, JIAO Hua-zhe, LIU Xiao-hui
2013, 35(12): 1553-1558. DOI: 10.13374/j.issn1001-053x.2013.12.007
Abstract PDF
Separating low-content nickel and cobalt in bioleaching solution by different extraction systems
LIU Ji-hong, ZHOU Gui-ying, WEN Jian-kang
2013, 35(12): 1559-1564. DOI: 10.13374/j.issn1001-053x.2013.12.012
Abstract PDF
Effect of oxygen partial pressure on the sintering process of iron ores
HUANG Xue-jun, GUO Yu-feng, ZHANG Jun, GUO Xing-min
2013, 35(12): 1565-1568. DOI: 10.13374/j.issn1001-053x.2013.12.013
Abstract PDF
Expression of oxidation ability for metallurgical slags based on the ion and molecule coexistence theory
LI Peng-cheng, LI Jin-yan, ZHANG Meng, ZHANG Jian-liang, ZHANG Jian, YANG Xue-min
2013, 35(12): 1569-1579. DOI: 10.13374/j.issn1001-053x.2013.12.001
Abstract PDF
Comprehensive mathematical model of direct reduction for rotary hearth furnaces
SHE Xue-feng, WANG Jing-song, HAN Yi-hua, ZHANG Xin-xin, XUE Qing-guo
2013, 35(12): 1580-1587. DOI: 10.13374/j.issn1001-053x.2013.12.014
Abstract PDF
Solid-state decarburization kinetics of high-carbon ferrochrome powders by microwave heating
WANG Chen-liang, CHEN Jin, HAO Jiu-jiu, GUO Li-na, HAN Pei-de
2013, 35(12): 1588-1594. DOI: 10.13374/j.issn1001-053x.2013.12.015
Abstract PDF
Distribution of small bubbles at IF continuous casting slab subsurface
LIU Bing-gang, WEN Guang-hua, TANG Ping, LUO Lin-qing, RUAN Xiao-ming, SHI Chun-yue
2013, 35(12): 1595-1600. DOI: 10.13374/j.issn1001-053x.2013.12.016
Abstract PDF
Microstructure and mechanical properties of hot-rolled Nb-V-Ti microalloyed TRIP steel based on dynamic transformation of undercooled austenite
WANG Ming-qing, LI Long-fei, YANG Wang-yue, SUN Zu-qing
2013, 35(12): 1601-1606. DOI: 10.13374/j.issn1001-053x.2013.12.008
Abstract PDF
Dynamic recrystallization behavior of Inconel 690 during hot continuous deformation
TAN Hua-chao, DONG Jian-xin, ZHANG Mai-cang, YAO Zhi-hao
2013, 35(12): 1607-1614. DOI: 10.13374/j.issn1001-053x.2013.12.009
Abstract PDF
Magnetic memory signal characteristic of metal under fatigue loading
XU Ming-xiu, CHEN Zhang-hua, XU Min-qiang
2013, 35(12): 1615-1621. DOI: 10.13374/j.issn1001-053x.2013.12.010
Abstract PDF
Friction-wear behaviors of TiAISiN coatings prepared by cathodic arc ion plating
KONG De-jun, FU Gui-zhong, ZHANG Lei, YE Cun-dong
2013, 35(12): 1622-1627. DOI: 10.13374/j.issn1001-053x.2013.12.011
Abstract PDF
Effect of utilizing lime mediated sludge to produce cement on cement performance
ZHANG Kun, XING Yi, HONG Chen, JIANG Zhang-lu, WANG Zhi-qiang, ZHAO Rui-xue
2013, 35(12): 1628-1635. DOI: 10.13374/j.issn1001-053x.2013.12.002
Abstract PDF
Aging behaviors of polyurethane films exposed to UV/O3 atmosphere
WANG Hai-yan, WANG Yan-zhi, SUN Zong-hui, TIAN Ke-song, ZHANG Wan-fu, HUANG Shi-jie
2013, 35(12): 1636-1642. DOI: 10.13374/j.issn1001-053x.2013.12.003
Abstract PDF
Charging behavior in a bell-less blast furnace based on 3D discrete element method
ZHANG Jian-liang, QIU Jia-yong, GUO Hong-wei, LIU Zheng-jian, SUN Hui, WANG Guang-wei, GAO Zheng-kai
2013, 35(12): 1643-1652. DOI: 10.13374/j.issn1001-053x.2013.12.017
Abstract PDF
Improvement of measurement methods for surface heat flux under water jet impinging
DOU Rui-feng, WEN Zhi, ZHOU Gang, LIU Xun-liang, FENG Xiao-hong, LUO Jian-feng
2013, 35(12): 1653-1658. DOI: 10.13374/j.issn1001-053x.2013.12.020
Abstract PDF
Noncontact measurement of in-plane displacement under high ternperature conditions
SU Lan-hai, MA Xiang-hua, REN Bao-min, BI Jia, LIU Dan-dan
2013, 35(12): 1659-1667. DOI: 10.13374/j.issn1001-053x.2013.12.018
Abstract PDF
Thermal-structural coupling analysis of wet clutch friction discs
ZHANG Jia-yuan, DING Pu-xian, LI Zhang-geng, SONG Zhi-wen
2013, 35(12): 1668-1673. DOI: 10.13374/j.issn1001-053x.2013.12.019
Abstract PDF