ZHENG Pan-pan, CHEN Leng. Inhomogeneity of cold-rolled texture in low-carbon steel sheets[J]. Chinese Journal of Engineering, 2015, 37(S1): 51-55. DOI: 10.13374/j.issn2095-9389.2015.s1.009
Citation: ZHENG Pan-pan, CHEN Leng. Inhomogeneity of cold-rolled texture in low-carbon steel sheets[J]. Chinese Journal of Engineering, 2015, 37(S1): 51-55. DOI: 10.13374/j.issn2095-9389.2015.s1.009

Inhomogeneity of cold-rolled texture in low-carbon steel sheets

More Information
  • Received Date: January 05, 2015
  • Available Online: July 16, 2021
  • Published Date: July 16, 2021
  • Texture of the surface and center of the cold-rolled low-carbon steel sheets were measured by X-ray diffraction method.The experimental results show that {112} 〈110〉 and {001} 〈110〉 texture components exist in the surface of the steel sheets and {112} 〈110〉 and {111} 〈110〉 texture components exist in the center of the steel sheets. It is obvious that the cold-rolled textures of the low-carbon steel sheets are inhomogeneous from surface to center. The textures evolution process of body centered cubic metals were simulated by the modified Sachs model and the simulation results show good consistence with the experimental results.
  • Related Articles

    [1]FENG Jun-xiao, LIANG Kai-li, ZHANG Cai, XU Jing-hai, ZHANG Yong-ming, YANG Jin-bao. Mathematical model of the pellet thermal process in an annular cooler[J]. Chinese Journal of Engineering, 2010, 32(12): 1596-1600. DOI: 10.13374/j.issn1001-053x.2010.12.014
    [2]GUO Jing, CHENG Shu-sen, DU Peng-yu. Mathematical models to predict raceway penetration and variation laws in a blast furnace[J]. Chinese Journal of Engineering, 2010, 32(11): 1476-1482. DOI: 10.13374/j.issn1001-053x.2010.11.018
    [3]ZHU Qingtian, CHENG Shusen. Mathematical model of burden trajectory in a blast furnace[J]. Chinese Journal of Engineering, 2007, 29(9): 932-936. DOI: 10.13374/j.issn1001-053x.2007.09.037
    [4]FAN Bailin, YAN Guoan, GUAN Kezhi, LIU Lin, HUANG Yongjian. Flow Stress Mathematical Models of Stainless at Hot Deformation[J]. Chinese Journal of Engineering, 2002, 24(3): 280-283. DOI: 10.13374/j.issn1001-053x.2002.03.055
    [5]XUE Qingguo, GAO Xiaowu, CHENG Susen. Numerical Simulation of Temperature Field in Blast Furnace Wall Cooled with Stave System(I): Influence of Refractory Kind and its Wear Extent[J]. Chinese Journal of Engineering, 2000, 22(2): 127-130. DOI: 10.13374/j.issn1001-053x.2000.02.009
    [6]Li Sujian, Wu Qingyi. Dynarmic Adjustment Mathematical Models of Producting Logistics in Mixing Charge[J]. Chinese Journal of Engineering, 1995, 17(4): 355-360. DOI: 10.13374/j.issn1001-053x.1995.04.010
    [7]Guan Kezhi, Zhao Haishi, Liu Ping. Mathematical Model of Laminar Cooling of Hot Rolling Process[J]. Chinese Journal of Engineering, 1994, 16(S2): 23-27. DOI: 10.13374/j.issn1001-053x.1994.s2.005
    [8]Li Sujian, Wu Qingyi. Study on Mathematical Models of Production Logistics in Mixing Charge[J]. Chinese Journal of Engineering, 1994, 16(5): 440-445. DOI: 10.13374/j.issn1001-053x.1994.05.008
    [9]Zhou Yunqing, Fang Jianhua. Mathematical Model of Temperature Drop of Molten Steel in Tundish[J]. Chinese Journal of Engineering, 1991, 13(S1): 90-96. DOI: 10.13374/j.issn1001-053x.1991.s1.014
    [10]Qiu Xiatao, Li Aixian. Mathematical Models of Heat Transfar and Optimization for the Four-section Oil Fired Continuous Furnace[J]. Chinese Journal of Engineering, 1990, 12(5): 478-483. DOI: 10.13374/j.issn1001-053x.1990.05.013

Catalog

    Article Metrics

    Article views PDF downloads Cited by()
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return