column
Key technologies for high grade pipeline refining
LIU Jian-hua, CUI Heng, BAO Yan-ping
2009, 31(S1): 1-6. DOI: 10.13374/j.issn1001-053x.2009.s1.041
Abstract PDF
Effect of different bottom blowing argon methods on LF refining
FENG Ju-he, LI Bo-bin, WEI Guo-zeng, AN Zhi, LI Xue-min, JIA Ya-nan
2009, 31(S1): 7-11,15. DOI: 10.13374/j.issn1001-053x.2009.s1.040
Abstract PDF
Effect analysis of the LF refining process for A36 and 45A
WU Wei, ZHAI Jun, ZHOU Yuan-hua, XIONG Yin-cheng, LI Bin, HU Bing
2009, 31(S1): 12-15. DOI: 10.13374/j.issn1001-053x.2009.s1.039
Abstract PDF
Technology of metallurgy for continuous scrap preheating electric arc furnace
YAN Li-yi, WANG Yi-dong, LI Yan-zhi, LIU Yi-xin, NA Jun
2009, 31(S1): 16-21. DOI: 10.13374/j.issn1001-053x.2009.s1.038
Abstract PDF
Experimental research on non-carbon metallurgy by solar photovoltaic technology
WU Hua-feng, LI Shi-qi, ZHU Rong, WANG Yu-gang, LIU Run-zao
2009, 31(S1): 22-27. DOI: 10.13374/j.issn1001-053x.2009.s1.037
Abstract PDF
Optimization of crystallization properties of mold flux for slab casting of medium-carbon steel
JING Cai-liang, YIN Na, ZHAO Zi-feng, ZHANG Jiong-ming, WANG Xin-hua, WANG Wan-jun
2009, 31(S1): 28-31. DOI: 10.13374/j.issn1001-053x.2009.s1.036
Abstract PDF
Oxygen jet technology in BOF
LI Cun-lao, ZHU Rong, WANG Hui-xia, HAN Li-hui, SHI Li-guang
2009, 31(S1): 32-37. DOI: 10.13374/j.issn1001-053x.2009.s1.035
Abstract PDF
Numerical and physical simulation on inner structure optimization of a continuous casting tundish and its metallurgical effect
TANG Hai-yan, YU Man, LI Jing-she, BAO Yan-ping, JIANG Jing, JI Chuan-bo, LI Tao
2009, 31(S1): 38-42. DOI: 10.13374/j.issn1001-053x.2009.s1.034
Abstract PDF
Technique and estimation of using reducing gas from iron ore-coal briquette to produce direct reduced iron
SU Ya-jie, DU Ying-hu, CHEN Shou-lin
2009, 31(S1): 43-48. DOI: 10.13374/j.issn1001-053x.2009.s1.033
Abstract PDF
Optimization of purification control during tapping
BAI Rui-guo, ZHU Rong, LIANG Xin-wei, ZHOU Zhen-hua, ZHANG Xing-li
2009, 31(S1): 49-52. DOI: 10.13374/j.issn1001-053x.2009.s1.032
Abstract PDF
Study on the optimum process of refining ULC steel by RH degasser
YUE Feng, CUI Heng, LI Peng-huan, BAO Yan-ping
2009, 31(S1): 53-57. DOI: 10.13374/j.issn1001-053x.2009.s1.031
Abstract PDF
Research and application of a high-sensitive slag detection system
TIAN Lu, BAO Yan-ping, LI Juan, HUANG Yu-jun
2009, 31(S1): 58-61. DOI: 10.13374/j.issn1001-053x.2009.s1.030
Abstract PDF
Industrial experiment and thermodynamic analysis of deoxidization and desulfurization in the LF refining process of clean pipe steel
CHU Ying, GUO Han-jie, YANG Xue-min, CHEN Jun
2009, 31(S1): 62-66. DOI: 10.13374/j.issn1001-053x.2009.s1.029
Abstract PDF
Study on the nitrogen alloying process of nitrogen-contained 316 L stainless steel
CUI Heng, DONG Zhi-ping, SHI Yan-lin, LI Shi, DU Jian-xin, LIU Hong, BAO Yan-ping
2009, 31(S1): 67-71. DOI: 10.13374/j.issn1001-053x.2009.s1.028
Abstract PDF
Variation of total oxygen in RH refining and operation improvement
QU Tie, ZHU Wan-jun, TIAN Yi-sheng, SUN Wei, LIN Li-ping
2009, 31(S1): 72-75. DOI: 10.13374/j.issn1001-053x.2009.s1.024
Abstract PDF
Study on high efficient desulfurization of new type synthetic refining slag
LI Gui-hai, ZHU Rong, LIN Teng-chang
2009, 31(S1): 76-79. DOI: 10.13374/j.issn1001-053x.2009.s1.023
Abstract PDF
Study on the materials and energy condition of using four furnace charges in EAF steelmaking process
YU Jian, LI Shi-qi, SUN Kai-ming, WANG Hui-bin, ZHANG Lian-jun
2009, 31(S1): 80-83. DOI: 10.13374/j.issn1001-053x.2009.s1.022
Abstract PDF
Experiment and technology of adding nitrogen in nitrogen-containing stainless steels by blowing nitrogen gas
LI Gang, LI Jing-she, YANG Shu-feng, WANG Yan-jie, LI Nai-song
2009, 31(S1): 84-87. DOI: 10.13374/j.issn1001-053x.2009.s1.021
Abstract PDF
Removal behavior and technics of simultaneous desiliconization and removing manganese and titanium in hot metal
LI Chuang, GUO Han-jie
2009, 31(S1): 88-91. DOI: 10.13374/j.issn1001-053x.2009.s1.020
Abstract PDF
Thermodynamics on the formation and transformation of MgO·Al2O3 inclusions in alloy steel
JIANG Gui-lian, LI Jing-she, LI Xiang-dong, WANG Zai-fei, LIN Xiao-chuan
2009, 31(S1): 92-94. DOI: 10.13374/j.issn1001-053x.2009.s1.019
Abstract PDF
Thermodynamic analysis on typical inclusions in pipeline steel
YU Jian, LI Jing, WANG Fu-ming, FU Jie, YASEN·Abulikemu
2009, 31(S1): 95-99. DOI: 10.13374/j.issn1001-053x.2009.s1.018
Abstract PDF
Infection for deoxidation behavior in 430 stainless steel with complex deoxidizers
LI Yang, LI Wei-jian, JIANG Zhou-hua, LI Shuang-jiang
2009, 31(S1): 100-103. DOI: 10.13374/j.issn1001-053x.2009.s1.017
Abstract PDF
Bubble and inclusion removal in molten steel
ZHAO Jing-jing, CHENG Shu-sen, TAO Tao
2009, 31(S1): 104-107. DOI: 10.13374/j.issn1001-053x.2009.s1.016
Abstract PDF
Effect on inclusions in molten iron treated by SiMg,Al and combination of both
WEN Bin, SONG Bo, MAO Jing-hong, WANG Fu-ming
2009, 31(S1): 108-112. DOI: 10.13374/j.issn1001-053x.2009.s1.015
Abstract PDF
Influences of VD refining process on total oxygen content and[Al]s content in GCr15 steel
HU Wen-hao, ZHU Shi-li
2009, 31(S1): 113-117. DOI: 10.13374/j.issn1001-053x.2009.s1.014
Abstract PDF
Inclusion coagulation and removal rate in molten steel
SHU Zhi-hao, CHENG Shu-sen, ZHAO Jing-jing, CHENG Zi-jian
2009, 31(S1): 118-120. DOI: 10.13374/j.issn1001-053x.2009.s1.013
Abstract PDF
Study on total oxygen content and micro inclusion of bearing steel GCr15 during RH vacuum process
WU Hua-jie, BAO Yan-ping, YUE Feng, TIAN Xin-zhong, XUE Zheng-xue, AI Xin-gang, JIA Nan
2009, 31(S1): 121-124. DOI: 10.13374/j.issn1001-053x.2009.s1.012
Abstract PDF
Mechanism and effect of calcium treatment on oil casing steels
TANG Hai-yan, LI Jing-she, YANG Shu-feng, WANG Jian-bin
2009, 31(S1): 125-129. DOI: 10.13374/j.issn1001-053x.2009.s1.027
Abstract PDF
MgO·Al2O3 based inclusions in gas cylinder steel during refining
SONG Yan-qi, LI Jing-she, LI Jiao, WANG Zai-fei, YANG Shu-feng
2009, 31(S1): 130-134. DOI: 10.13374/j.issn1001-053x.2009.s1.026
Abstract PDF
Study on the cleanliness of crank steel S34MnV produced by the EAF-LF(VD)-VT
LIU Jian-hui, ZHU Rong, LIN Teng-chang, MIN Xing-hai, QU Su-jun, PANG Zong-xu, BAI Jing
2009, 31(S1): 135-140. DOI: 10.13374/j.issn1001-053x.2009.s1.025
Abstract PDF
Low melting point zone control of the Al2O3-SiO2-MgO-CaO-MnO system for hard wire steel
CHAI Guo-qiang, WANG Fu-ming, LI Zhang-rong
2009, 31(S1): 141-144. DOI: 10.13374/j.issn1001-053x.2009.s1.011
Abstract PDF
Control of TiN inclusion precipitation in bearing steel
CENG Xin-guang
2009, 31(S1): 145-149. DOI: 10.13374/j.issn1001-053x.2009.s1.010
Abstract PDF
Control of titanium nitride in bearing steel
TIAN Xin-zhong, LIU Run-zao, ZHOU Chun-fang, XUE Zheng-xue, ZHONG Bao-jun
2009, 31(S1): 150-153. DOI: 10.13374/j.issn1001-053x.2009.s1.009
Abstract PDF
Inclusions in HSLA steel containing 0.065%Ti
YU Jian, LI Jing, LI Guang-qiang, FU Jie, XIAO Ai-da, WANG Jian-feng, QI Da
2009, 31(S1): 154-158. DOI: 10.13374/j.issn1001-053x.2009.s1.008
Abstract PDF
Effect of EMBr on fluid flow,heat transfer and inclusion removing during CC
WU Su-zhou, LI Zhi-zheng, ZHANG Jiong-ming, ZHAO Xin-yu
2009, 31(S1): 159-163. DOI: 10.13374/j.issn1001-053x.2009.s1.007
Abstract PDF
Research and application of a high-sensitive slag detection system
TIAN Lu, BAO Yan-ping, HUANG Yu-jun
2009, 31(S1): 164-167. DOI: 10.13374/j.issn1001-053x.2009.s1.006
Abstract PDF
Study on solidification of round billet horizontal continuous casting and quality of casting blank
NING Jian-cheng, ZHU Rong, DONG Kai, ZHOU Chun-fang
2009, 31(S1): 168-172. DOI: 10.13374/j.issn1001-053x.2009.s1.005
Abstract PDF
Study on the broadening correction of slab in continuous casting
FU Jian-xun, LI Jing-she, ZHANG Hui, ZHANG Xing-zhong, SHEN Chang, LIU Xue-hua, ZHANG Qiao-ying
2009, 31(S1): 173-176. DOI: 10.13374/j.issn1001-053x.2009.s1.004
Abstract PDF
Effect of abnormally large prior-austenite grains on the presence of surface intergranular cracks
LI Peng-huan, BAO Yan-ping, YUE Feng, PENG Zun, WU Hua-jie
2009, 31(S1): 177-181. DOI: 10.13374/j.issn1001-053x.2009.s1.003
Abstract PDF
Ostwald ripening of Ti(C,N) in 20CrMnTi gear steels
WANG Guang-lian, ZHU Rong, SHEN Jing-xia, QI Hai-quan, ZHANG Li-ping, LI Zhi-zheng
2009, 31(S1): 182-184. DOI: 10.13374/j.issn1001-053x.2009.s1.044
Abstract PDF
Influence of Nb content on the stacking fault energy and mechanical properties of Fe-22Mn-0.4C alloy
DAI Yong-juan, MI Zhen-li, TANG Di, JIANG Hai-tao, LV Jian-chong
2009, 31(S1): 185-189. DOI: 10.13374/j.issn1001-053x.2009.s1.043
Abstract PDF
VOD refining of ultra-low carbon martensitic stainless steel
LIU Jian-hui, ZHU Rong, LI Shi-qi, LIN Teng-chang
2009, 31(S1): 190-193. DOI: 10.13374/j.issn1001-053x.2009.s1.002
Abstract PDF
Influence factors on solid-solution of carbonitride of niobium in steel
WANG Chun-lei, LI Jing-she, ZHAO He-ming, CHEN Yong-feng
2009, 31(S1): 194-198. DOI: 10.13374/j.issn1001-053x.2009.s1.001
Abstract PDF
Microsegregation behaviors of alloy elements and their effects on the formation of banded structure in pinion steels
ZHANG Yan-ling, LIU Hai-ying, RUAN Xiao-jiang, LI Guo-zhong, BAI Li-guo, WANG Fu-ming
2009, 31(S1): 199-206. DOI: 10.13374/j.issn1001-053x.2009.s1.042
Abstract PDF